How to assemble a Kids bike Tricycle?
Manual Kids Bike Tricycle. Need more help? Please reach out to our Customer Care on +31 (0) 20 2611433 or via email at [email protected] A local bike shop can also do it, but it will be at your own cost.
Manual Kids Bike Tricycle. Need more help? Please reach out to our Customer Care on +31 (0) 20 2611433 or via email at [email protected] A local bike shop can also do it, but it will be at your own cost.
You can also find the assembly manual for Veloretti Kids bikes and an assembly video . Need more help? Please reach out to our Customer Care on +31 (0) 20 2611433 or via email at [email protected] A local bike shop can also do it, but it will be
Is your kid ready for a new challenge? It's easy to take the wheels off the Veloretti Tricycle and convert it into a Mini balance bike. You can also find the assembly manual for Veloretti Kids bikes and an assembly video .
Sure can! To convert your balance bike into a tricycle you will need a tricycle set, which can be ordered via Customer Care. Once you have all the parts you need, you can follow the manual here.
Assembling our Kids bikes is easy. You can find the assembly manual for the Veloretti Maxi here and an assembly video . Need more help? Please reach out to our Customer Care on +31 (0) 20 2611433 or via email at [email protected] A local bike
Assembling our Kids bikes is easy. You can find the assembly manual for the Veloretti Junior here and an assembly video . Need more help? Please reach out to our Customer Care on +31 (0) 20 2611433 or via email at [email protected] A local bike
A bell needs to be secured with two screws to the handlebar, if you want to change the bell for another one you can unscrew one side and loosen the other side a bit so you are able to take the bell off. If you place the new bell make sure you tighten
If you ordered a new saddle for the Mini you can simply swap it by opening the seatpost clamp and swap the whole seat post with the seat attached to it. With the Junior and Maxi bikes you can open the saddle clamp by loosening the bolt at the bottom
When placing new grips, you first need to take the old ones off. Pulling old rubber grips off needs some force. New grips can then slide over the handlebar. Need more help? Please reach out to our Customer Care on +31 (0) 20 2611433 or via email at
Installing a light is easy, you just have to connect the lamp hook to the lamp with a nut and bolt. After you do that you can unscrew the long bolt that's in your front fork and place the light on there. If the lamp is in the right place you can
Installing a lock on a Maxi or Junior bike takes a little more work than installing a lock on a city bike which has holes for it in the frame. For the Junior and maxi you need to install it using a flex mount from Axa. Need more help? Please reach ou
To add training wheels to a Kids bike you first need to loosen the wheel nuts, put the wheels on, and tighten the nuts again. Ideally, the wheels are mounted a little bit above the floor so they only give support if the kid loses balance. Need more